DH electronics GmbH
scroll Scroll Down down

DHCOR STM32MP15

Based on MPU from STM32MP1 family

  • Solderable system on module in postage stamp size with only 29 x 29 x 3.2 mm
  • MPU from the famous STM32MP1 series by STMicroelectronics
  • Solder-on module enables cost-effective, automated assembly
  • Optimal for motor control due to PWM synchronized AC timer
  • Suitable for powerful graphical user interfaces
  • Avenger96 as reference design
  • Guaranteed long-term availability of 10+ years
Possible Application
Automation
Metrology
eMobility
Engineering
Health

Board type

Solderable SOM

5-Cent Cooling available

Yes

CPU details

2x ARM Cortex-A7 up to 800 MHz
1x ARM Cortex-M4 up to 209 MHz

CPU vendor

ST

CPU type

Cortex-A7
Cortex-M4

Co-processor available

Yes

Number of cores

1 | 2

GPU available

Yes

GPU type

3D GPU Vivante® @533 MHz - OpenGL® ES 2.0

PMIC

STPMIC1A

Security

Crypto Engine, Secure Boot

DDR3 DRAM

256 / 512 / 1024 MB

SPI NOR flash

2 MB

Bluetooth available

No

WiFi available

No

BSP

Linux (Debian, Yocto)

Power supply

5.0 VDC

Typ. power consumption

1.0 W

Operating temperature

-40 to +85 °C

Storage temperature

-40 to +85 °C

Dimensions

29.0 x 29.0 x 3.2 mm

Available interfaces for LGA (271 pins)

Bus interface

8 / 16 Bit

Ethernet

1x Gbit, IEEE 1588, 1x MDIO

MMC/SD

3x SDIO 3.0 / SD 3.0 / eMMC 4.51

NAND

8 / 16 Bit interface Raw MLC / SLC, 8 Bit ECC

Quad SPI

Dual Quad SPI

CAN

2x FDCAN / TTCAN

UART

4x UART, 4x USART up to 12.5 Mbit/s

SPI

6x up to 50 Mbit/s

I2C

6x

USB host

2x USB 2.0 High-speed

USB OTG

1x OTG 2.0 Full-speed / High-speed

Embedded USB PHYs

2x High-speed, 1x Full-speed

CSI (parallel camera)

1x 8 / 10 / 14 Bit

Display RGB

24 Bit

MIPI-DSI

MIPI®-DSI 2 data lanes

HDMI-CEC

1x

ADC

2x 16 Bit synchronized up to 22 channels

DAC

2x 12 Bit

ADC / DAC VREF

Internal 1.5 / 1.8 / 2.048 / 2.5 V or VREF+ Input

SPDIF

4x Tx, 4x Rx

Temperature sensor

1x

I2S / SAI

4x

Number of GPIOs

148

PWM / Timer

2x 16-Bit motor control PWM-synchronized AC timer
10x 16 Bit timer
5x 16 Bit LP timer
2x 32 Bit timer

RTC

Secure RTC

DFSDM

1x 8 channels / 6 filters

Debug interface

JTAG interface

Our DHCOR STM32MP15 from the well-known STM32MP1 microprocessor series, consisting of two powerful ARM Cortex-A7 with up to 800 MHz and one ARM Cortex-M4 with up to 209 Mhz. from STMelectronics is a solder-on module without connectors for increased operational reliability with 29 x 29 x 3.2 mm in postage stamp size and enables cost-effective, automated assembly. The STM32MP1 microprocessor series from STMicroelectronics enables easy development for a wide range of applications. The STM32MP1 series is based on a heterogeneous ARM Cortex-A7 single or dual and Cortex-M4 single or dual core architecture and supports multiple, flexible applications. The Cortex-A7 core provides access to open source operating systems (Linux/Android). The Cortex-M4 core leverages the STM32 MCU ecosystem. The DHCOR STM32MP15 is optimal for motor control and powerful, graphical user interfaces due to its PWM-synchronized AC timers.  The application possibilities of the System on Module from DH electronics are versatile and range from building automation to laboratory and measurement technology, machine and plant engineering to e-mobility. DH electronics also offers a guaranteed long-term availability of 10+ years for the DHCOR STM32MP15.

STM32-based DHSOMs

Board type

Solderable SOM

5-Cent Cooling available

Yes

CPU details

2x ARM Cortex-A7 up to 800 MHz
1x ARM Cortex-M4 up to 209 MHz

CPU vendor

ST

CPU type

Cortex-A7
Cortex-M4

Co-processor available

Yes

Number of cores

1 | 2

GPU available

Yes

GPU type

3D GPU Vivante® @533 MHz - OpenGL® ES 2.0

PMIC

STPMIC1A

Security

Crypto Engine, Secure Boot

DDR3 DRAM

256 / 512 / 1024 MB

SPI NOR flash

2 MB

Bluetooth available

No

WiFi available

No

BSP

Linux (Debian, Yocto)

Power supply

5.0 VDC

Typ. power consumption

1.0 W

Operating temperature

-40 to +85 °C

Storage temperature

-40 to +85 °C

Dimensions

29.0 x 29.0 x 3.2 mm

Available interfaces for LGA (271 pins)

Bus interface

8 / 16 Bit

Ethernet

1x Gbit, IEEE 1588, 1x MDIO

MMC/SD

3x SDIO 3.0 / SD 3.0 / eMMC 4.51

NAND

8 / 16 Bit interface Raw MLC / SLC, 8 Bit ECC

Quad SPI

Dual Quad SPI

CAN

2x FDCAN / TTCAN

UART

4x UART, 4x USART up to 12.5 Mbit/s

SPI

6x up to 50 Mbit/s

I2C

6x

USB host

2x USB 2.0 High-speed

USB OTG

1x OTG 2.0 Full-speed / High-speed

Embedded USB PHYs

2x High-speed, 1x Full-speed

CSI (parallel camera)

1x 8 / 10 / 14 Bit

Display RGB

24 Bit

MIPI-DSI

MIPI®-DSI 2 data lanes

HDMI-CEC

1x

ADC

2x 16 Bit synchronized up to 22 channels

DAC

2x 12 Bit

ADC / DAC VREF

Internal 1.5 / 1.8 / 2.048 / 2.5 V or VREF+ Input

SPDIF

4x Tx, 4x Rx

Temperature sensor

1x

I2S / SAI

4x

Number of GPIOs

148

PWM / Timer

2x 16-Bit motor control PWM-synchronized AC timer
10x 16 Bit timer
5x 16 Bit LP timer
2x 32 Bit timer

RTC

Secure RTC

DFSDM

1x 8 channels / 6 filters

Debug interface

JTAG interface

Item Number Model (other configurations on request) Product description
HS00028 DHCR-STM32MP151A-C065-R051-V33-SPI-I-01LG DHCOR STM32MP151A, 650 MHz, 512 MByte DRAM, 3.3 V IO voltage, 2 MByte SPI boot flash, -40 to +85 °C, DHCOR revision, LGA connection
HS00023 DHCR-STM32MP153C-C065-R051-V33-SPI-I-01LG DHCOR STM32MP153C, 650 MHz, 512 MByte DRAM, 3.3 V IO voltage, 2 MByte SPI boot flash, -40 to +85 °C, DHCOR revision, LGA connection
HS00012 DHCR-STM32MP157C-C065-R051-V33-SPI-I-01LG DHCOR STM32MP157C, 650 MHz, 512 MByte DRAM, 3.3 V IO voltage, 2 MByte SPI boot flash, -40 to +85 °C, DHCOR revision, LGA connection
HS00022 DHCR-STM32MP157F-C080-R102-V33-SPI-I-01LG (-20°C - 85°C) DHCOR STM32MP157F, 800 MHz, 1024 MByte DRAM, 3.3 V IO voltage, 2 MByte SPI boot flash, -20 to +85 °C, DHCOR revision, LGA connection
* Other configurations on request
What is the model number for ordering? DHCR-CPU-Cxxx-Rxxx-Vxx[-SPI]-X-01LG
CPU STM32MP157C: Dual Cortex®-A7, HW Crypto, 3D GPU, FDCAN, MIPI®-DSI
STM32MP157A: Dual Cortex®-A7, 3D GPU, FDCAN, MIPI®-DSI
STM32MP153C: Dual Cortex®-A7, HW Crypto, FDCAN
STM32MP153A: Dual Cortex®-A7, FDCAN
STM32MP151C: Single Cortex®-A7, HW Crypto
STM32MP151A: Single Cortex®-A7
Cxxx 650 MHz: C065, 800 MHz: C080
Rxxx 256 Mbyte: R025, 512 Mbyte: R051, 1024 Mbyte: R102
Vxx 1V8 IO voltage: V18, 3V3 IO voltage: V33
X Commercial temperature range (0 to +70 °C): C, Industrial temperature range (-40 to +85 °C): I
Industrial temp. range is –20 to +85 °C for 800 MHz version. Please contact us for more details.
01LG DHCOR Revision, LGA connection
Options  
[-SPI] 2 Mbyte SPI boot flash

Our DHCOR STM32MP15 from the well-known STM32MP1 microprocessor series, consisting of two powerful ARM Cortex-A7 with up to 800 MHz and one ARM Cortex-M4 with up to 209 Mhz. from STMelectronics is a solder-on module without connectors for increased operational reliability with 29 x 29 x 3.2 mm in postage stamp size and enables cost-effective, automated assembly. The STM32MP1 microprocessor series from STMicroelectronics enables easy development for a wide range of applications. The STM32MP1 series is based on a heterogeneous ARM Cortex-A7 single or dual and Cortex-M4 single or dual core architecture and supports multiple, flexible applications. The Cortex-A7 core provides access to open source operating systems (Linux/Android). The Cortex-M4 core leverages the STM32 MCU ecosystem. The DHCOR STM32MP15 is optimal for motor control and powerful, graphical user interfaces due to its PWM-synchronized AC timers.  The application possibilities of the System on Module from DH electronics are versatile and range from building automation to laboratory and measurement technology, machine and plant engineering to e-mobility. DH electronics also offers a guaranteed long-term availability of 10+ years for the DHCOR STM32MP15.

STM32-based DHSOMs

Back to overview