DH PicoITX2
Product Details
Due to its picoITX form factor our DH PicoITX2 baseboard can replace or upgrade legacy solutions directly. Just add the module from our portfolio that fits your application best and complement with a touch display if required.
So you can start your project with a pre-integrated, ready-to-use solution and focus on your specific development. Our individual support gives your design an extra boost.
| SODIMM-200 | DHCOM standard compliant |
| BSPs | Linux, Android, Windows CE |
| Ethernet | 10 / 100 Mbit |
| USB | 1 x Host 2.0, 1 x OTG 2.0 |
| Serial | 1 x RS232 (Rx / Tx / Rts / Cts), 1 x RS232 (Rx / Tx / Rts / Cts) or RS485, 1 x UART (Rx / Tx) |
| CAN | 1 x CAN (up to 1MBaud) or CAN (without Transceiver) |
| I2C | 1 |
| SPI | 1, 1 Chip Select |
| Display | 1 x RGB, 24 bit, On request: 1 x single channel LVDS, 24 bit (with display and backlight supply) |
| Touch | 4-wire resistive |
| PWM | 1, 16 bit |
| GPIOs | 4 IOs |
| Inputs | 1 x Opto-coupler (optional additional Input alt. to CAN) |
| Outputs | 1 x Open Collector (optional additional Output alt. to CAN) |
| Run | Green |
| Status | Yellow (software controlled) |
| Power supply | 9 to 28 VDC |
| Battery | Connector for CR2032 |
| Cooling | DH 5-Cent Cooling Solution |
| Temperature range | Operating: -40 to +85 °C |
| Dimensions | 100 x 72 x 18 mm |
